Servo and Stepper
Taiwan hanyu Holdings Group Ltd
1- SERVO MOTOR AND DRIVERS:
- Modes of control: Speed, Position, Torque
- High bandwidth and high response
- Easy servo parameters setting via RS232 and software
- 3 section position –command electronic gear ratio
- On the fly change of position and speed modes
- Temperature O℃ -55℃
- Yaskawa technology and software
- Analogue input ,Analogue output ,HSPO
- Absolute encoder 17/33bit、22/38bit、23/39bit
- Safety Class : IP65
- Insulation resistance above DC500V, 10M above
- Support Modbus RS485 Communication
3- STEPPER MOTOR AND DRIVE
- Unipolar and Bipolar constant current, 2 Phase Bi-polar Micro-stepping Drive
- Pulse Input frequency up to 200 kHz , Selectable resolutions up to 12800 steps
- Standby and running current adjust
- Current off digital input
- Safety Class : IP65
- Insulation resistance DC600V, 12M above
- Optically isolated differential TTL inputs for Pulse, Direction and Enable signal inputs
- Current reduction by 50% automatically, when motor standstill mode is enabled
4- CNC Controller
- CNC system for CNC lathe dedicated control system 32 bit embedded CPU and large-scale programmable logic device CPLD, using real time multi task control technology.
- Simultaneously controlled axes are two, three and four axes.
- Min movement is 0.001 mm.
- Max moving speed is 60000mm/min.